Set Appointment

Special Offer

Special Offer

10% Discount on your Fall Start Up

Limited Time Offer: Nov. 1, 2019 - Nov. 15, 2019

Call for details

631-821-5246

FURNACE MAINTENANCE CHECK LIST

1. Heat Exchanger – Inspected for cracks & deterioration

Heat exchangers can develop cracks with age. If they exist, there is a risk of serious illness from the toxic fumes emitted.

2. Burners – Removed & cleaned if necessary

Dirty burners can cause poor combustion, soot, condensation, and will shorten the life of the furnace. You pay for useful heat that ?goes up the chimney? instead of going into your house.

3. Fan Switch – Checked & adjusted

A fan switch that is not properly adjusted can waste energy and cause nuisance fan cycling

4. Pilot & Pilot Assembly – Cleaned & adjusted as necessary

Weak or dirty pilots can easily be extinguished causing the furnace to shut down

5. Safety Controls – Operationally inspected

Safety controls that do not operate can cause dangerous problems.

6. Gas Line – Leak checked from the furnace shut off valve to the burners

Undetected gas leaks are dangerous.

7. Combustion Air – Openings will be checked

Blocked or restricted combustion air openings can be dangerous.

8. Flue Pipe – Inspected

Flue pipe corrosion or leaks are dangerous.

9. Temperatures & Performance – Recorded

An accurate record of vital data can indicate potential problems that can be eliminated.

10. Panels – Secure all panels

Loose panels can increase operating costs and cause either a shutdown or a dangerous condition.

11. Lubrication – Application to motors & bearings

Improperly lubricated rotating equipment will eventually fail.

12. Belts & Pulleys – Inspected & adjusted

Loose belts and worn pulleys decrease air flow, increase operating costs and shorten the compressor’s life. Belts crack and break with age.

13. Air Filter – Replaced at customer’s option

A restricted air filter can cause your air conditioning unit to waste energy and shorten the compressor’s life.

14. Voltage & Amp – Draw of the blower motor, compressor & condenser fan motors checked & recorded

Improper voltage and amp draw increase operating costs and can shorten the life of any motor.

15. Thermostat – Checked & calibrated

Improperly calibrated thermostats cause the unit to run longer than necessary. Every degree your air conditioner operates below 78 degrees can add 5%-8% to the cost of cooling.

Call To Action Button